Sharp PGF267X - XGA DLP Projector Setup Manual - Page 12
Browse online or download pdf Setup Manual for Projector Sharp PGF267X - XGA DLP Projector. Sharp PGF267X - XGA DLP Projector 34 pages. (2500 ansi lumens) short-throw brilliantcolor dlp projector
Also for Sharp PGF267X - XGA DLP Projector: Specification Sheet (2 pages)
Print Page
Setting up the Projector Network Environment
5
5
Click "Internet Protocol Version 4
(TCP/IPv4)", and click the
"Properties" button.
6
6
Confi rm or change an IP address
for the setup computer.
1 Confi rm and note the current IP
address, Subnet mask and Default
gateway.
Make sure to note the current IP address,
Subnet mask and Default gateway as you
will be required to reset them later.
2 Set temporarily as follows:
IP address: 192.168.150.3
Subnet mask: 255.255.255.0
Default gateway: (Do not input any
values.)
Note
•
The factory default settings for the projector are
as follows:
DHCP Client: OFF
IP address: 192.168.150.2
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0
7
7
After setting, click the "OK"
button, and then restart the
computer.
After confi rming or setting, proceed to "3. Setting up Network Connection for the Projector".
-12
1
1
2
2