Sharp PGF267X - XGA DLP Projector Setup Manual - Page 30

Browse online or download pdf Setup Manual for Projector Sharp PGF267X - XGA DLP Projector. Sharp PGF267X - XGA DLP Projector 34 pages. (2500 ansi lumens) short-throw brilliantcolor dlp projector
Also for Sharp PGF267X - XGA DLP Projector: Specification Sheet (2 pages)

Print Page

Sharp PGF267X - XGA DLP Projector Setup Manual

Resetting the Lamp Timer of the Projector via LAN

When the projector is connected to a network, you can use the communications program

to send a command to reset the lamp timer. The example below uses Windows

operating system. When you use Windows Vista

referring to the following steps, because Windows Vista

HyperTerminal.

Click "Start" – "All Programs" –

"Accessories" – "Communica-

tions" – "HyperTerminal".

•

If you do not have HyperTerminal installed,

see the operation manual of your computer.

•

Depending on the settings of your computer,

you may be required to enter your area code

and other details. Enter the information as

required.

Enter a name in the "Name" ﬁ eld,

and click "OK".

If you are required to enter the

area code, enter it in the "Area

code" ﬁ eld. From the "Connect

using" drop-down menu, select

"TCP/IP (Winsock)", and click

"OK".

Enter the IP address of the

projector in the "Host address"

ﬁ eld (see "TCP/IP" on the

"Network" menu of the projector),

and enter the data port of the

projector in the "Port number"

ﬁ eld ("10002" is the factory default

setting), and click "OK".

-30

, use other communications program

does not come with

XP as the

Select

"TCP/IP (Winsock)"