Sharp XG-F315X Setup Manual - Page 25
Browse online or download pdf Setup Manual for Projector Sharp XG-F315X. Sharp XG-F315X 34 pages. Xga data projectors
Also for Sharp XG-F315X: Specification Sheet (2 pages), Specifications (2 pages)
Print Page
The setting procedure for each item will be explained. For the basic procedure, please refer
to "Set Items" on page 23.
IP Address Setting
([1]IP Address)
Setting of IP address.
setup>1
IP Address
:192.168.150.2
Please Enter
:192.168.150.3
(change)
—>
192.168.150.3
1 1 1 1 1 Enter "1" and press the "Enter" key.
2 2 2 2 2 Enter numerical value to be set and press the
"Enter" key.
Display IP address after change (*).
Subnet Mask Setting
([2]Subnet Mask)
Setting subnet mask.
setup>2
Subnet Mask
:255.255.255.0
Please Enter
:255.0.0.0
(change)
—>
255.0.0.0
1 1 1 1 1 Enter "2" and press the "Enter" key.
2 2 2 2 2 Enter numerical value to be set and press the
"Enter" key.
Display subnet mask after change (*).
Setting up the Projector Using RS-232C or Telnet
Default Gateway Setting
([3]Default Gateway)
Setting default gateway.
1
setup>3
note: "0.0.0.0" means "Using no default gateway."
2
Gateway Address :0.0.0.0
Please Enter
*
(change)
1 1 1 1 1 Enter "3" and press the "Enter" key.
2 2 2 2 2 Enter numerical value to be set and press the
"Enter" key.
Display gateway address after change (*).
• If the values for IP Address, Subnet Mask or Gate-
way of the projector have been changed via Telnet,
the computer cannot be connected to the projector
depending on the computer's network settings.
1
2
*
User Name Setting
([4]User Name)
Carrying out security protection using user name.
setup>4
User Name
Please Enter
(change)
1 1 1 1 1 Enter "4" and press the "Enter" key.
2 2 2 2 2 Enter user name and press the "Enter" key.
Display set user name (*).
• User name can be up to 8 characters.
• You can input the characters below :
a-z, A-Z, 0-9, -, _
• In the default state, user name is not set.
:192.168.150.1
—> 192.168.150.1
Note
:
: XX-XXXX
—>
XX-XXXX
Note
1
2
*
1
2
*
-25