Sharp XV-Z7000E Operation Manual - Page 14

Browse online or download pdf Operation Manual for Projector Sharp XV-Z7000E. Sharp XV-Z7000E 48 pages. Sharp projector operator's manual

Print Page

Connecting the Projector

Connecting RS-232C Port

When the RS-232C port on the projector is connected to a computer with an RS-232C cable (null modem, cross

type, sold separately), the computer can be used to control the projector and check the status of the projector.

See pages 43 and 44 for details.

1 Connect the supplied DIN-D-sub RS-232C cable to the RS-232C port on the projector.

2 Connect an RS-232C cable (null modem, cross type, sold separately) to the other end of DIN-D-sub RS-232C

cable and to the serial port on the computer.

CAUTION

• Do not connect or disconnect an RS-232C cable to or from the computer while it is on. This may damage your computer.

• The RS-232C function may not operate if your computer port is not correctly set up. Please refer to the operation manual of

the computer for details on setting up.

• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorised LCD

Projector Dealer or Service Centre.

RS-232C cable

(null modem, cross type, sold separately)

DIN-D-sub RS-232C

cable

DIN-D-sub

RS-232C cable

RS-232C

Projector

INPUT 1

/CO