Crestron 4K DigitalMedia 3-Series Supplemental Manual - Page 13

Browse online or download pdf Supplemental Manual for Controller Crestron 4K DigitalMedia 3-Series. Crestron 4K DigitalMedia 3-Series 20 pages. Media presentation controller
Also for Crestron 4K DigitalMedia 3-Series: Quick Start Manual (2 pages), Do Manual (2 pages), Quick Start Manual (7 pages), Quick Start (2 pages), Quick Start Manual (8 pages), Do Manual (2 pages), Do Manual (2 pages)

Print Page

Crestron 4K DigitalMedia 3-Series Supplemental Manual

Display Mode

The display mode of an image can be set to one of the following:

•

To configure Display Mode settings, use the web interface or SIMPL Windows as discussed

in the following sections.

Configuration Using the Web Interface

An overview of the steps necessary to configure the display mode is as follows:

NOTE:

1. On the Main Setup page, click the INTERNAL SCALER Settings button.

2. In the Display Mode list, click the radio button that corresponds to the desired

Configuration Using SIMPL Windows

Using SIMPL Windows, set the display mode in subslot 02 of the Outputs slot for the

DMPS3-4K-150-C. To do so, set the <Scaler_Display_Mode> analog input join to the

desired value.

NOTE:

Supplemental Guide – DOC. 7724A

Maintain aspect ratio

Stretch to fit

1:1 pixel mapping

Zoom

For detailed information, refer to the online help of the web interface.

The Output Configuration page for the internal scaler opens.

setting.

Output Configuration Page for Internal Scaler—Display Mode Configuration

For detailed information, refer to the SIMPL Windows help file.

DMPS3-4K-150-C: 3-Series 4K DigitalMedia Presentation System • 9