Shimano ALFINE Inter-11 Dealer's Manual - Page 17
Browse online or download pdf Dealer's Manual for Bicycle Accessories Shimano ALFINE Inter-11. Shimano ALFINE Inter-11 49 pages.
Print Page
INSTALLATION
Installation of the hub to the frame
Installation of the hub to the frame
1
(A)
2
(C)
Dropout
Standard
Reversed
Reversed
(full chain case)
Vertical
To be continued on next page
When not using the chain tensioner
Mount the chain on the sprocket, then
set the hub axle into the dropout.
(A) (B)
When using the chain tensioner
Mount the chain on the sprocket, then
(C)
set the hub axle into the dropout.
(B) (A)
Place the non-turn washers onto the
(B)
right side and left side of the hub axle.
At this time, turn the cassette joint so
that the protrusions of the non-turn
washers fit into the grooves in the
dropout and align the joint to be almost
parallel to the chainstay.
(D)
(E)
Non-turn washer
Mark / Color
Right
Left
5R/Yellow
5L/Brown
7R/Black
7L/Gray
6R/Silver
6L/White
5R/Yellow
5L/Brown
8R/Blue
8L/Green
Size
ϴ ≤ 20°
20° ≤ ϴ ≤ 38°
ϴ = 0°
ϴ = 0°
ϴ = 60° - 90°
17
(A)
Hub axle
(B)
Dropout
(C)
Chain tensioner
NOTICE
When using the chain tensioner, be sure to
read these service instructions in conjunction
with the service instructions for the CT-S500
chain tensioner.
(A)
Non-turn washer (for left side)
(B)
Dropout groove
(C)
Chainstay
(D)
Cassette joint
(E)
Non-turn washer (for right side)
TECH TIPS
•
Use a non-turn washer that matches the
shape of the dropout. Different non-turn
washers are used for the left and right
sides.
•
The protrusion should be on the dropout
side.
•
Install the non-turn washer so that the
protrusion fits securely in the dropout
groove at the front and back sides of the
hub axle.
Mark
θ