Shimano DEORE BL-M6000 Dealer's Manual - Page 29
Browse online or download pdf Dealer's Manual for Bicycle Accessories Shimano DEORE BL-M6000. Shimano DEORE BL-M6000 39 pages. Hydraulic disc brake
Print Page
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. List of Tools to be Used
- 4. Installation
- 4. Disc Brake Mount Adapter (for 180Mm Disc Brake Rotors)
- 4. Disc Brake Rotor Adapter
- 4. Brake Hose
- 5. Maintenance
- 5. Adding Shimano Genuine Mineral Oil and Bleeding Air
- 5. Replacing the Brake Hose
- 5. Replacing the Brake Pads
MAINTENANCE
Replacing the brake hose
Replacing the brake hose
Brake lever side
If there is a marking as shown in the illustration, refer to the section "Replacing the brake hose (easy hose joint
system)" in General Operations.
1
(A)
2
(z)
To be continued on next page
Use a utility knife or other cutting tool
to cut the brake hose.
(z)
(z)
In order to check that the ends of the
(A)
brake hose are fitted securely into the
base of the brake hose mounts of the
brake calipers and brake lever, make
marks on the brake hose beforehand as
shown in the illustration.
(As a guide, the length of brake hose
inside the mount should be
approximately 11mm, measured from
the cut end of the brake hose.)
(z)
NOTE
90°
Approx. 11mm
29
Mark
NOTE
Use the utility knife safely and correctly in
accordance with its instruction manual.
TECH TIPS
If you are using TL-BH62, refer to the manual
accompanying the product.
(A)
Mark