Shimano STEPS E6000 User Manual - Page 28
Browse online or download pdf User Manual for Bicycle Shimano STEPS E6000. Shimano STEPS E6000 46 pages. Shimano steps e6000 battery and charger
Print Page
3.11.4 Air system
*
On some suspension forks it is possible to
alter the air pressure. You will need assis-
tance from your cycle dealer to do this, or if
you feel confident of doing it yourself, a sus-
pension fork pump with a pressure gauge
and the suspension fork manufacturer's in-
stallation manual. The valve with cap (e.g.
marked 'AIR') is usually located on the left-
hand side of the fork.
4.
Before every trip
DANGER
Replace any damaged (e.g. cracks, grooves) or bent components
before using the bike again. Not doing so can lead to essential parts
failing and cause a serious fall.
Do not use the bike if it is not in perfect technical condition. If you are
unsure, ask a cycle dealer to check it over.
We recommend asking your cycle dealer to assemble and adjust the
bike. Otherwise, components could become loose due to a faulty as-
sembly. If this happens whilst you are cycling, you could injure your-
self very seriously or even die.
Inspect your pedelec before every trip, and after each time it has been
transported anywhere or left unattended. Use the following checklist to
help you.
EN-28
Original User Guide | Pedelec Shimano Steps E6000 Version 1
Checklist
Type
Characteristics
Frame / forks
Check the frame and forks for visible warping, cracks and
damage.
Handlebars / front stem
Check they are seated securely.
Check that the bell is working and attached correctly and
securely.
Saddle / seatpost
Check that the quick-release skewers / through-axles (if available)
are secure.
Wheels
Check the condition (damage, foreign bodies), concentricity and
pressures of the tyres.
The maximum permissible pressure is marked on
the side of a tyre in bar and psi (pounds per square
inch). Tyres should not be inflated above or below this
pressure.
Check the valves are seated securely.
Visually inspect the rims for damage and wear.
Check that the quick-release skewers / through-axles (if available)
are secured correctly.
Chain
Check the chain, pinions and sprockets for wear and damage.
Brakes
Check that the brake system (including brake levers) is working
and attached correctly and securely.
Visual inspection of the brake pads/disks.
Lights
Check that the light system is adjusted and in working order.
Check that reflectors are affixed in accordance with applicable
national traffic regulations.
Threaded joints
Check that all threaded joints are tightened as specified.
Luggage
Check it is attached securely.
*dependent on model