Shimano STEPS E6000 User Manual - Page 36
Browse online or download pdf User Manual for Bicycle Shimano STEPS E6000. Shimano STEPS E6000 46 pages. Shimano steps e6000 battery and charger
5.3.1.3 Sleep mode
To prevent a total discharge, the battery management
system switches the battery to Sleep mode. Your battery
reverts to Sleep mode after 10 days (depending on charge
level).
To wake from Sleep mode
1. Press the battery button for one second. The following appears:
Display
Description
The first, second, third, fourth and fifth LEDs come on in order and then
all go off.
2. The battery has now "woken up".
If no LED flashes, or all five LEDs flash several times, the
battery may be faulty
Initiating Sleep mode
1. Briefly press the battery button twice. The following appears:
Display
Description
The first and fifth LEDs flash twice.
2.
The battery is now in Sleep mode.
EN-36
Original User Guide | Pedelec Shimano Steps E6000 Version 1
7.1 Battery Page
EN-44.
5.3.2 Inserting and locking the battery
IMPORTANT
Grasp the battery firmly, so that it does not fall out of your hand. It
can be damaged if you drop it.
One-key system: The same key (if available) can be used for
the cycle and battery lock.
1. Hold the battery, with the discharger
connector pointing downwards, at an
angle of 80˚, slightly tilted to the left in
front of the docking station.
2. Place the battery catches into the dents
provided.
3. Push the battery forwards and
upwards into the docking station
until the locking mechanism engages.
For 1. Hold in front of the docking station
Battery nibs
Recesses
For 2. Battery nibs into recesses
For 3. Push battery into docking station