Shimano STEPS E6000 User Manual - Page 41
Browse online or download pdf User Manual for Bicycle Shimano STEPS E6000. Shimano STEPS E6000 46 pages. Shimano steps e6000 battery and charger
Print Page
6.2
Technical details
Battery voltage
AC input voltage
Frequency
Max. DC output voltage
Max. charge current
Dimensions ( L | W | H )
Permissible ambient
temperature when charging
Storage temperature
Recommended storage
temperature
Weight
Protection class
Charger connected to
power supply
| green LED flashes
Battery being charged
| green LED flashes
Fully charged
| green LED continually ON
!
Charging fault
| red LED flashes
Description of
charging indicator
36 V
230 - 240 V
50 – 60 Hz
42 V
4 A
206 mm | 94 mm | 61 mm
0 to +40 °C
-10 to +50 °C
18 to 23 °C
753 g
The charger is only intended to be used
indoors. Keep the charger away from rain
and moisture. Water penetrating into the
charger poses a risk of electric shock.
Power cable
Charging cable
LEDs
Mains connector
The charging display symbols can vary. If you are not sure
what the symbols mean, contact your cycle dealer.
6.3
Functions
6.3.1 Charging the battery
DANGER
Read and follow the information on the charger specification plate,
otherwise there is a risk of misuse resulting in serious injuries.
Damaged batteries must not be charged.
The battery can remain on the pedelec during the charging
process. It can also be removed and charged elsewhere.
1. Connect the power cable to the battery charger.
2. Fold up the protective cap on the battery.
3. Connect the charging cable to the battery charging socket (it clicks into
place).
4. Insert the mains plug into a power socket. The red LED lights red
briefly
, then the green LED flashes at a constant speed
Original User Guide | Pedelec Shimano Steps E6000 Version 1
.
EN-41