Shimano SG-8C20 Technical Service Instruction - Page 2
Browse online or download pdf Technical Service Instruction for Industrial Equipment Shimano SG-8C20. Shimano SG-8C20 4 pages. Inter-8 coaster hub
Also for Shimano SG-8C20: Service Manual (36 pages)
Print Page
SG-8C20
CJ-8S20
Technical Service Instructions
Be sure to read these service instructions in
conjunction with the service instructions for the
Inter-8 shifting lever before use.
Installation of the cassette joint to
the hub
1.
Install the driver cap to the driver on the right side of the
hub body.
Driver cap
Driver
Driver cap
SI-35P0A
Inter-8 Hub
with Coaster Brake
Cassette Joint
Note the
direction
2.
Turn the cassette joint pulley in the direction of the
arrow in the illustration to align the red
pulley and the bracket. With the cassette joint in this
condition, install it so that the red
cassette joint is aligned with the red
side of the hub body.
Should be aligned
Cassette joint
Align the red
marks to install.
Right side of
the hub body
3.
1)
Secure the cassette joint to the hub with the cassette
joint fixing ring. When installing the cassette joint
fixing ring, align the yellow
mark on the cassette joint pulley.
Align the
yellow
marks
to install.
Cassette joint pulley
2)
After installing the cassette joint fixing ring, turn it 45
clockwise.
Turn 45
CJ-8S20
JAPAN
Fit the cassette joint
bracket securely.
marks on the
mark on the
mark on the right
Pulley
Bracket
CJ-8S20
JAPAN
CJ-8S20
JAPAN
Align the red
marks to install.
mark with the yellow
Cassette joint fixing ring
CJ-8S20
JAPAN
Cassette joint fixing ring