Digital Barriers EDGEVIS VIDEO ROUTER 4 Hardware Installation Manual - Page 8
Browse online or download pdf Hardware Installation Manual for Network Router Digital Barriers EDGEVIS VIDEO ROUTER 4. Digital Barriers EDGEVIS VIDEO ROUTER 4 16 pages.
Print Page
EDGEVIS VIDEO ROUTER HARDWARE INSTALLATION
Section 2 - Configuring communications on the EdgeVis
Video Router
The EdgeVis Video Router supports communications over Wi-Fi and
Cellular. Refer to the EdgeVis Encoder and MiniCam Setup Guide for
instructions on this step.
Connecting over a 3G/4G cellular network
A valid mobile micro-size SIM card is required in order to connect the EdgeVis Video Router over a cellular
communications bearer. The unit has an inbuilt modem for 3G/4G connection.
Despite the ultra-efficient bandwidth usage achieved by TVI, the EdgeVis Video Router is considered a heavy data use
product on cellular networks. It is recommended that an unlimited data plan (or if unavailable, a heavy consumption
data plan) is setup with your Mobile Network Service Provider.
To insert a SIM card, locate the SIM card connector on the unit rear face. The SIM card contacts should face upwards
with chamfered edge first when inserted, see figure below for guidance.
To eject a SIM card, press the SIM card and it will be ejected from the unit. The network settings (for your Mobile
Network Service Provider) are entered during device setup – details of which are covered in Section 2 of the EdgeVis
Encoder and MiniCam Setup Guide.
Note SIM Card Orientation: Contacts up, chamfered corner first. SIM card clicks into place when inserted correctly.
SIM Card will eject when pushed.
ISSUED: 29 NOVEMBER 2022
PAGE 8