Crestron FlipTop FT2 Series Quick Start Manual - Page 5

Browse online or download pdf Quick Start Manual for Control Systems Crestron FlipTop FT2 Series. Crestron FlipTop FT2 Series 11 pages. Ac power outlet modules
Also for Crestron FlipTop FT2 Series: Quick Start (2 pages), Quick Start (2 pages), Quick Start Manual (11 pages), Quick Start Manual (2 pages), Quick Start Manual (9 pages), Quick Start Manual (9 pages), Quick Start Manual (11 pages), Getting Started (2 pages), Getting Started (2 pages), Getting Started (2 pages), Manual (2 pages), Manual (2 pages), Manual (2 pages), Quick Start Manual (7 pages), Quick Start Manual (8 pages), Quick Start (2 pages), Quick Start Manual (2 pages), Quick Start (2 pages), Quick Start (2 pages), Quick Start Manual (2 pages), Quick Start (2 pages), Quick Start (2 pages)

Print Page
Crestron FlipTop FT2 Series Quick Start Manual
FT2-500-ELEC-PTL
FlipTop™ FT2 Series Cable Management System, 500 Size, Electrical, Pass-Through Lid
To connect the power supply to the power bus:
1. Underneath the FT2-500-ELEC-PTL, connect the power supply to the
bottom of the power bus.
If connecting one power supply, connect the power supply's power
l
cord to the single connector end of the DC power splitter cable.
Refer to step 1 in
Secure the FlipTop
If connecting two power supplies, connect each power supply's
l
power cord to a barrel jack in the power bus.
2. Use the two included tie wraps to dress the power cord.
3. Slide the power supply into the power supply holder until it is secured
in place.
Assembly.
4. Align the four keyed tabs on the power supply holder with four keyed
slots on the FT2 assembly. Then, push the power supply holder up and
into the slots so that the keyed tabs engage the wide end of the slots.
Quick Start
5