Digital Barriers EDGEVIS HD-IP250 Installation Manual - Page 6

Browse online or download pdf Installation Manual for DVR Digital Barriers EDGEVIS HD-IP250. Digital Barriers EDGEVIS HD-IP250 14 pages.

EDGEVIS HD-IP250 HARDWARE INSTALLATION
Updating the software on the unit
Once notified of a new software release by Digital Barriers, updates are available for download from the EdgeVis
support site (see below for link) for installation onto the device.
There are two ways to update the firmware – locally using a USB Pen, or remotely using EdgeVis Server.
To update remotely, upload the new firmware to the Firmware page within the EdgeVis Server web interface
and then, from the Encoder's status and diagnostics page, select Upgrade Firmware from the menu on the
right-hand side.
To update locally, copy the update onto a USB flash drive and insert into a USB port on the front of the unit.
The flash drive can be inserted into a running unit or before the unit is powered up. The update procedure will
cause the LEDs under the Ethernet and USB ports to cycle. When the update is complete, all LEDs will remain
on. At this point it is safe to remove the pen and the unit will automatically reboot.
To access or register for the Digital Barriers Support Site, visit
ISSUED: 10 NOVEMBER 2020
tvi-support.digitalbarriers.com
PAGE 6