Accutone USB400 VoIP COMMUNICATION HEADSET Installation Manual & User Manual - Page 4

Browse online or download pdf Installation Manual & User Manual for Headsets Accutone USB400 VoIP COMMUNICATION HEADSET. Accutone USB400 VoIP COMMUNICATION HEADSET 8 pages. Voip communication headset
Also for Accutone USB400 VoIP COMMUNICATION HEADSET: Install Manual & User Manual (12 pages)

Print Page
connection & setup
Hooking all the parts together!
1 CONNECTING THE COMPUTER
Connect the USB plug extended from the USB400 headset to the USB port of your
notebook or desktop computer. The LED indicator will light up indicating correct
connection to the computer.
2 ADJUSTING YOUR HEADSET
There are multiple points of adjustment with the USB400 headset, designed for comfort
as well as accomodating different preferences. The double-arm headband (A) is
extendable on both sides to fit different head sizes; and the aluminum voice tube (B) is
rotatable so users can place the microphone closer to their mouth if neccessary. The
suggested distance between a user's mouth and the microphone is 1/2 inch.
A
to USB port
The voice tube rubber holder (C) also allows
adjustments, so users can shorten the
extension of the microphone capsule when
needed.
B
USB400 Headset
C

installing USB driver

3 LED INDICATIONS
The LED-indicator on the USB controller is able to display various status of the device,
and the definitions are listed as below:
steady GREEN light
flashing GREEN light
STANDBY MODE
OPERATING MODE
the device is in
the device is
standby mode, ready
operating, meaning
to receive or
voice data is being
transmit voice data.
received.
4 INSTALLING USB DRIVER & SOFTWARE
To begin, you should restart your computer, and when your operating system finishes
loading, close all applications and connect the USB400 headset to any USB port in your
computer. This manual will use Windows XP interface as demonstration but the steps
should be identical for Windows 98SE, ME or 2000 versions.
Please note that after you plug in the USB400 headset, your operating system
may automatically launch the Hardware Installation Wizard. You should abort
such installation by pressing cancel, because you should use the Driver Software
CD for optimal performance.
(1) Connect USB400 headset to USB port of computer
(2) Insert "Driver & Software Installation CD" into your CD-ROM
(3) Setup program should start automatically
(4) If Setup program doesn't start, go to the root directory of your CD-ROM and click
on the setup.exe file
* Apple Macintosh OS X automatically detects the USB device and loads up the driver instantly, no software or
driver installation is required.
®
Accutone USB VoIP headset - Installation Guide & User Manual
Setup new device from your computer.
steady AMBER light
flashing AMBER light
MUTED STANDBY
MUTED OPERATING
the device is in
the device is
standby mode but
operating, but
microphone is
microphone has
muted and no data
been muted, the
is coming in or going
device can receive
out.
data but not
transmit.