Actron AutoScanner OBD II Scan Tool CP9575 User Manual - Page 6
Browse online or download pdf User Manual for Medical Equipment Actron AutoScanner OBD II Scan Tool CP9575. Actron AutoScanner OBD II Scan Tool CP9575 16 pages. Autoscanner obd ii scan tool
Print Page
4. Plug the OBD II Connector attached to the Tool into the vehicle
connector.
The Tool automatically reads Codes and I/M Monitors and dis-
plays the data. When done viewing data, press BACK key to
return to Main Menu.
====================
Read Codes
Erase Codes
MIL Status
State OBD Check
View Data
View Freeze Data
Main Menu User Interface
To select functions:
1.
From the Main Menu, press the READ or ERASE arrow key
until the desired function is highlighted, then press the
ENTER key to retrieve and display the results.
2. When complete, press BACK to return to the Main Menu
selection screen.
Read Codes
To read the codes:
⇒ Press and hold the READ key for 2 seconds then release it, or
Select Read Codes from Main Menu.
When you view codes, the Tool displays both Diagnostic Trouble Codes
(DTCs) and Pending DTCs. Diagnostic Trouble Codes are reported
when a component, sensor, or other part of the vehicle is indicating a
malfunction is present. The malfunction must be present for a sufficient
amount of time before the Tool will display a Diagnostic Trouble Code.
Pending DTCs are only reported if a problem occurs during the current
or last completed drive cycle. Pending DTCs do not necessarily indicate
MAIN MENU
^^
6