Digital China Networks WL8200-I2 Installation Manual - Page 12

Browse online or download pdf Installation Manual for Wireless Access Point Digital China Networks WL8200-I2. Digital China Networks WL8200-I2 13 pages. Wl8200 series

Print Page

Wireless Access Point

Installation Manual

User can use the Ethernet cable to connect the Ethernet interface of the AP and the

switch which supports PoE function to power to the AP.

WL8200 series adopts the 802.3af/802.3at PoE power supply. When the USB is not

used, it adopts the 802.3af PoE power supply; if the USB is used, it should adopt the

802.3at PoE power supply. The device provides two Ethernet interfaces of LAN1 and

LAN2. Only LAN1 provides PoE power function as below. The marks of the two interfaces

are LAN1 and LAN2 respectively. When the network cable is plugged in, please plug the

PoE cable in the LAN1.

3.5.3 Local Power

WL8200 series can also adopt the power adapter for power supply. The power

adapter uses 12V DC power and please ensure if the adapter is chosen correctly before

powering on.

The power adapter and the power cord are not provided; user should choose to buy

them.

Items

power adapter input

power adapter output

3.5.4 Checking after Power

Check if the LED of AP works normally after connecting the power. The explanation of

LED status is seen in the product spec.

Fig 3-8 POE power supply interface

Table 3-1 power adapter specifications

100-240V AC

+12V

3-6

Chapter 3 AP Installation

Explanation