Digital Combo DK20S Manual - Page 10
Browse online or download pdf Manual for Power Tool Digital Combo DK20S. Digital Combo DK20S 20 pages. Multi-purpose press
Print PageThe lower table on the machine is
interchangeable. Different sized optional
tables can be obtained for various
materials & handling requirements.
The tables simply fit right onto the
pedestal. The 2 holes in the drop on tables
& curved forms fit onto the 2 steel pins
on the pedestal. Often times it is beneficial
to leave one of the steel pins slightly loose
to make changing out tables easier. This
will not effect evenness of pressing or
table stability.
The table can be easily adjusted in a straight position if the heat
platen does not correctly line up with the pressing surface. The pedestal
the table rests on can slide front to back on the base of the machine.
Loosen the screw in the gibb plates that holds the pedestal in place in
order to adjust its position.
The pedestal can also be slightly rotated in order to align with
the upper platen. Loosen all (4) screws holding the gibb plates in
place, position/rotate the pedestal to the desired place, and retighten
the gibb plates.
There is a 1/2-moon cap holddown
device for stretching the cap over the
curved bottom table.
Simply pull the back strap of the cap
behind the pedestal and under the 1/2-
moon shaped bracket. This will hold the
cap in place for proper printing.
10