Digital Electronics Corporation PL7901-T42 Installation Manual - Page 14

Browse online or download pdf Installation Manual for Touch Panel Digital Electronics Corporation PL7901-T42. Digital Electronics Corporation PL7901-T42 17 pages.

Print Page

Black

White

Green/

Yellow

Max. 6.0 mm [0.24 in.]

Attachment

Screws

Transparent

Cover

2) Loosen and remove the middle

three(3) screws from the terminal

strip. Align the crimp terminals

with each screw hole, and tighten

the screws.

• Crimp Terminal Types :

V1.25-3, by J.S.T. or equivalent

(JIS standard part number :

RAV1.25-3)

• Crimp terminals must be the same

as shown below.

φ φ φ φ φ 3.2 mm [0.13 in.] or larger

• The colors in the figure above

are for the cable which came

with the PL.

• This power cable is designed

only for AC100/115V use. Be

sure to use a different cable

when using other than AC100/

115V power.

3) Reattach the terminal strip's

transparent cover with the

attatchment screws.