Digital Electronics Corporation PS-2000B Series Installation Manual - Page 11

Browse online or download pdf Installation Manual for Desktop Digital Electronics Corporation PS-2000B Series. Digital Electronics Corporation PS-2000B Series 17 pages. Windows 2000 multi language preinstalled hard disk unit
Also for Digital Electronics Corporation PS-2000B Series: Installation Manual (16 pages)

Print Page

External Output Signal (DOUT Port)

Rated Load Voltage

Maximum Load Current

Maximum Voltage Drop between Terminals 1.5V (at 100mA load current)

Isolation Method

(Interface Circuit)

+5V

Be sure to operate the unit within its maximum load current. If the maxi-

mum load current exceeds this range, a malfunction or PS-B damage may

occur.

Installing the PS-B

Use the following procedures to install the PS-B into a solid panel.

1) Use the four (4) attachment screws included in the PS-B's packing box to

attach the mounting brackets to the PS-B main unit. Be careful that each

bracket is attached to the correct side.

When Installing the PS-B vertically

DOUT0(+), DOUT1(+)

DOUT2(+), DOUT3(+)

SSTA06

PC357

DOUT0(-), DOUT1(-)

4.7kΩ

DOUT2(-), DOUT3(-)

DC12V to DC24V

100mA/point

Via photocoupler

(Connection Example)

Cable

D-sub 25 pin Connector

Load

DC12 to DC24V