Digital Equipment DEC 3000 300 AXP Series Setting Up Your System - Page 6

Browse online or download pdf Setting Up Your System for Desktop Digital Equipment DEC 3000 300 AXP Series. Digital Equipment DEC 3000 300 AXP Series 13 pages.

Print Page

5. Connect the Monitor

1. Attach the universal strain relief strap

monitor video cable. This will prevent the weight

of the cable from loosening the connections to the

monitor. Follow these steps:

a. Insert the three RGB video connectors

cable junction block

of the strap.

b. Pull the cable junction block into the bottom slot

of the strap.

c. Insert the green (G) connector into the top closed

hole of the strap.

2. Connect the RGB connectors

follows:

For a color monitor:

- If your monitor has two rows of three connec-

tors, attach the video connectors to the RGB

Video In ports.

- If you have five connectors, attach the video

connectors to the first three left-hand (RGB)

ports.

G /

MLO-010147

to the

and

through the center slot

to the monitor, as

For a monochrome monitor:

- Attach the connector marked G (green) to the

center connector on the monitor. (For more in

formation, see your monitor installation guide.)

Note: When you attach the G connector,

be sure you have the antistatic

wrist strap on.

3. Connect the monitor power cord to the monitor.

4. Connect the monitor power cord to the back of the

system unit, as shown in

already done.

MLO-010691

on panel 3, if not

MLO-010148