Bitstream HYPERION-300 Quick Start Manual - Page 3
Browse online or download pdf Quick Start Manual for Switch Bitstream HYPERION-300. Bitstream HYPERION-300 7 pages. Gigabit ethernet industrial switch
Also for Bitstream HYPERION-300: Manual (8 pages)
Print Page
Quick start manual, a detailed manual is on the enclosed CD
1.2
LEDs marking
1 – ERROR: critical alarm
2 – POWER1: supply on PWR 1
3 – POWER2: supply on PWR 2
4 – ALARM 3: status indicator relay output
5 – ALARM 2: status indicator relay output
6 – ALARM 1: status alarm
Ethernet interfaces state signalling
Each of Ethernet ports is equipped with signalling diode.
1G
– signaling link for Ethernet 1000Mbit/s (for activity - blinking)
10/100 – signaling link for Ethernet 10/100Mbit/s (for activity - blinking)
1.3
All connectors (except optical port and power connector) are RJ-45 connectors.
RJ-45 pinout is presented in the table.
1 (white/orange)
2 (orange)
3 (white/green)
6 (green)
1 (white/orange)
2 (orange)
3 (white/green)
4 (blue)
5 (white/blue)
6 (green)
7 (white/brown)
8 (brown)
REV.
V1.12
Signalling LEDs
Connectors description
Fig. 6. RJ-45 connector
Connector type: RJ-45 (PE1-PE8) Ethernet 10/100Mbit/s
RXAn
RXBn
TXAn
TXBn
Connector type: RJ-45 (PE1-PE8) Ethernet 1000Mbit/s
BI_DA+
BI_DA-
BI_DB+
BI_DC+
BI_DC-
BI_DB-
BI_DD+
BI_DD-
n – Ethernet (1-8) channel number
SHORT USER MANUAL HYPERION-30x
Fig. 5. Signalling LEDs
Channel transmitter
Channel receiver
Bidirectional +A
Bidirectional -A
Bidirectional +B
Bidirectional +C
Bidirectional -C
Bidirectional -B
Bidirectional +D
Bidirectional -D
20 21.03.31
3/7