Samsung A300 - SGH Cell Phone Quick Setup Manual - Page 8
Browse online or download pdf Quick Setup Manual for Cell Phone Samsung A300 - SGH Cell Phone. Samsung A300 - SGH Cell Phone 38 pages. Samsung lcd tv quick setup guide
Also for Samsung A300 - SGH Cell Phone: Manual (2 pages)
Print Page
Turning the TV On and Off
Press the POWER
button on the remote control.
You can also use the POWER
Viewing the Menus
With the power on, press the MENU button.
The main menu appears on the screen.
The menu's left side has icons: Picture, Sound,
Channel, Setup, Input.
Press the ▲ or ▼ button to select one of the icons.
2
Then press the ENTER
icon's sub-menu. Press the EXIT button to exit.
The on-screen menus disappear from the
➣
screen after about one minute.
Storing Channels in Memory
(Automatic Method)
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then
press the ENTER
Press the ▲ or ▼ button to select "Auto Program",
2
then press the ENTER
Press the ▲ or ▼ button to select the antenna
3
connection, then press the ENTER
TV
Selects the antenna to execute the Auto
Program function.
Air
Cable
Auto
Move
Move
When selecting the Cable TV system:
Press the ENTER
program.
Press the ◄ or ► button, then press the ▲ or ▼ to
select the correct analog signal cable system source
among "STD", "HRC", and "IRC".
Press the ENTER
If you have Digital cable TV, select the cable system
signal source for both Analog and Digital.
TV
Selects a cable signal type for your location.
Analog
STD
HRC
IRC
Digital
STD
HRC
IRC
Move
Move
button on the TV.
button to access the
button.
button.
button.
Auto Program
Start
Start
Start
Enter
Return
Enter
Return
button to start the auto
button.
Auto Program
Start
Enter
Return
Enter
Return
The TV begins memorizing all available stations.
After all the available channels are stored, it start to
remove scrambled channels.
Press the EXIT button to exit.
Auto Program in Progress.
DTV Cable : --
Removing scrambled channel.
To Stop the Auto Program Function
Press the MENU button while the Auto Program function is
being executed. You can also press the ENTER
to stop the setup.
Checking to see if Channels were Stored in Memory
Press the CH button. Only the channels stored in memory
will be selected (in order).
Selecting the antennas
• Air: "Air" antenna signal.
• Cable: "Cable" antenna signal.
• Auto: "Air" and "Cable" antenna signals.
English-
Auto Program
Auto Program
Plug & Play
Cable :
Cable 2
%
Stop
Enter
Return
Auto Program
Auto Program
Plug & Play
DTV Cable
0 %
Stop
Enter
Return
button