Digital Equipment DECserver 900TM Installation Manual - Page 4

Browse online or download pdf Installation Manual for Server Digital Equipment DECserver 900TM. Digital Equipment DECserver 900TM 16 pages.

Print Page

Installing the Module into a DEChub 900 MultiSwitch

You do not have to shut off the DEChub 900 MultiSwitch power when you install a module in the

hub. The DECserver 900TM has a built-in hot-swap switch that allows quick and easy power-on

installation and removal.

Install the module into the DEChub 900 MultiSwitch.

The release lever is

lifted and clicks

back into place

as the module

is seated

Mounting

Tab

a. Check the Hub Manager Status Display to ensure that there is

adequate power in the DEChub 900 MultiSwitch to accommodate

this module's power rating. You may have to add another

power supply to the DEChub 900 MultiSwitch to accommodate

this module without affecting other modules already in the hub.

b. Locate an available DEChub slot.

c. Place the module's bottom mounting tab into the mounting slot

on the hub.

d. Pivot the module on the mounting tab and align the connectors.

You hear the release lever click when the module is seated.

e. Press down on the release lever to ensure that it is locked.

f. Seating the module initiates the power up sequence and

self-test within 10 seconds if the available DEChub power is

sufficient. Read the Hub Manager Status Display for the

module status and power consumption.

LKG–8092-93I

DECserver 900TM