Digital Equipment RZ26 Installation Manual - Page 6

Browse online or download pdf Installation Manual for Storage Digital Equipment RZ26. Digital Equipment RZ26 16 pages. Installing in the digital ba42 expansion box

Print Page

3.2 Changing the SCSI ID Switch Setting

If the switches on your expansion box are set for a SCSI ID number that is not

available for use, use a pen or a small pointed object to ﬂip the switches you

need to change.

Table 1 shows the SCSI ID switch settings for hard disk drives.

Table 1 SCSI ID Numbers and Switch Settings for Hard Disk Drives

SCSI ID

Number

4 Installing the RZ26 Hard Disk Drive

Here are the steps you follow to install the RZ26 drive. The sections following

the list describe each step.

1. Remove the cover from the BA42 box.

2. Attach the adapter cable to the RZ26 drive.

3. Check the cables inside the box.

4. Attach the SCSI and power cables to the drive.

5. Insert the drive in the expansion box.

6. Tighten the captive screw on the drive bracket.

7. Replace the cover on the BA42 box.

Switch Settings

Switch 1

Switch 2

Down

Switch 3

Down