Siemens simatic ET 200MP Manual - Page 16

Browse online or download pdf Manual for Industrial Equipment Siemens simatic ET 200MP. Siemens simatic ET 200MP 30 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Also for Siemens simatic ET 200MP: Manual (40 pages), Manual (24 pages), Manual (29 pages), Manual (47 pages), Manual (26 pages), Manual (28 pages), Manual (50 pages), Manual (34 pages), User Manual (44 pages), Manual (25 pages), Manual (42 pages), Manual (28 pages), Manual (33 pages), Manual (49 pages), Manual (36 pages), Manual (39 pages), Manual (28 pages), Equipment Manual (35 pages), Equipment Manual (32 pages), Manual (29 pages), Manual (34 pages), Manual (36 pages), Equipment Manual (50 pages), Manual (45 pages)

Print Page

Parameters/address space

4.3 Address space

4.3

Address space

The module can be configured differently in STEP 7; see following table. Depending on the

configuration, additional/different addresses are assigned in the process image output/input.

Configuration options of DQ 16x230VAC/1A ST

You can configure the module with STEP 7 or with a GSD file.

When you configure the module by means of the GSD file, the configurations are available

under different short designations/module names.

The following configurations are possible:

Table 4- 2

Configuration options

Configuration

1 x 16-channel without value status

2 x 8-channel without value status

1 x 16-channel with value status for

module-internal Shared Output with

up to 4 submodules

Value status (Quality Information, QI)

The value status is always activated for the DQ 16x230VAC/1A ST MSO.

An additional bit is assigned to each channel for the value status. The bit for the value status

indicates if the output value specified by the user program is actually pending at the module

terminal (0 = value is incorrect).

Short designation/module name

in the GSD file

DQ 16x230VAC/1A ST

DQ 16x230VAC/1A ST S

DQ 16x230VAC/1A ST MSO

Digital output module DQ 16x230VAC/1A ST Triac (6ES7522-5FH00-0AB0)

Configuration software, e.g., STEP 7

Integrated in hardware

catalog STEP 7 V13,

STEP 7 V12 or higher or

SP1 or higher with

HSP 0119

(PROFINET IO only)

Manual, 09/2016, A5E34934069-AB

GSD file in

STEP 7 V5.5 SP3 or

higher

(PROFINET IO only)