Siemens simatic ET 200MP Manual - Page 19

Browse online or download pdf Manual for Industrial Equipment Siemens simatic ET 200MP. Siemens simatic ET 200MP 34 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Also for Siemens simatic ET 200MP: Manual (40 pages), Manual (24 pages), Manual (29 pages), Manual (47 pages), Manual (26 pages), Manual (28 pages), Manual (50 pages), Manual (34 pages), User Manual (44 pages), Manual (30 pages), Manual (25 pages), Manual (42 pages), Manual (28 pages), Manual (33 pages), Manual (49 pages), Manual (36 pages), Manual (39 pages), Manual (28 pages), Equipment Manual (35 pages), Equipment Manual (32 pages), Manual (29 pages), Manual (36 pages), Equipment Manual (50 pages), Manual (45 pages)

Print Page

Configuration / address space

5.1

The TM NPU can be configured with STEP 7 (TIA Portal) as of V16 with HSP 0333 and GSDML:

• Central deployment

– S7-1500 CPUs: as of V2.5

• Distributed deployment

– Interface Module IM 155-5 PN HF (6ES7 155-5AA00-0AC0): V3.0 or higher

– Interface Module IM 155-5 PN ST (6ES7 155-5AA01-0AB0): as of V4.1

Configuration of the TM NPU

You specify the properties of the module while configuring the module with STEP 7:

• Start address of the inputs

• Start address of the outputs

• Enable/disable load voltage diagnostics

• Enable/disable Gigabit Ethernet interface

• Enable/disable USB interface

Note

When configuring the TM NPU, note that either only the Gigabit Ethernet interface or the USB

interface can be enabled. Simultaneous activation of both interfaces is not possible and is

rejected by the module with a parameter assignment error.

You can find a configuration example of the TM NPU in the description of the application

example. You can obtain the application example from your SIEMENS representative.

Technology Module TM NPU

Equipment Manual, 09/2020, A5E46384784-AA