Siemens SIMATIC ET 200S Manual - Page 11

Browse online or download pdf Manual for Industrial Equipment Siemens SIMATIC ET 200S. Siemens SIMATIC ET 200S 16 pages. Distributed i/o digital electronic module 4do dc24v/2a hf
Also for Siemens SIMATIC ET 200S: Operator's Manual (18 pages), Manual (16 pages), User Manual (16 pages), User Manual (26 pages), Manual (37 pages), Manual (24 pages), Function Manual (40 pages), Operating Instructions (4 pages), Original Operating Instructions (19 pages), Original Operating Instructions (20 pages), Manual (34 pages), Manual (14 pages), Manual (24 pages), Original Operating Instructions (17 pages), Original Operating Instructions (19 pages), Manual (28 pages), Manual (12 pages), Manual (32 pages), Manual (18 pages), Manual (12 pages), Manual (28 pages), Manual (22 pages), Manual (22 pages), Manual (36 pages), Manual (16 pages)

Print Page
Siemens SIMATIC ET 200S Manual

Parameters

2.1

Parameters for PM-E DC24V HF

Parameters
The following table lists the power module parameters.
Table 2- 1
Diagnostics: No load voltage
The parameters are explained below.
Diagnostics: No load voltage
Use this parameter to enable a diagnostic message because there is no load voltage.
If there is no load voltage, only the diagnostic message of the affected power module is sent
to the DP master. The SF error LEDs of all modules in the relevant voltage group light up.
Power module PM-E DC24V HF (6ES7138-4CA60-0AB0)
Manual, 06/2010, A5E02515369-02
Parameters for power modules
PM-E DC24V HF
Range of values
Disable/enable
Disable
Default setting
Applicability
Power module
2
11