Siemens SIMATIC ET 200S Manual - Page 10

Browse online or download pdf Manual for Industrial Equipment Siemens SIMATIC ET 200S. Siemens SIMATIC ET 200S 22 pages. Distributed i/o digital electronic module 4do dc24v/2a hf
Also for Siemens SIMATIC ET 200S: Operator's Manual (18 pages), Manual (16 pages), User Manual (16 pages), User Manual (26 pages), Manual (37 pages), Manual (24 pages), Function Manual (40 pages), Operating Instructions (4 pages), Original Operating Instructions (19 pages), Original Operating Instructions (20 pages), Manual (34 pages), Manual (14 pages), Manual (24 pages), Original Operating Instructions (17 pages), Original Operating Instructions (19 pages), Manual (16 pages), Manual (28 pages), Manual (12 pages), Manual (32 pages), Manual (18 pages), Manual (12 pages), Manual (28 pages), Manual (22 pages), Manual (36 pages), Manual (16 pages)

Siemens SIMATIC ET 200S Manual
Properties
1.1 2AO I ST analog electronic module (6ES7135-4GB01-0AB0)
Crosstalk between the outputs
Operational limit (in the entire temperature range,
with reference to the output range)
Basic error limit (operational limit at 25°C with
reference to output range)
Temperature error (with reference to the output
range)
Linearity error (with reference to the output range) ± 0,02 %
Repeatability
(in steady state at 25°C with reference to output
range)
Output ripple (with reference to output range,
bandwidth 0 to 50 kHz)
Output range (rated value)
Load resistance
Destruction limit against voltages/currents applied
from outside
Connection of actuators
10
For inductive load
Open circuit voltage
Voltage at the outputs to M
Current
Two-wire connection
Four-wire connection
Suppression of interference, limits of error
Min. -40 dB
± 0,5 %
± 0,3 %
± 0.01 %/K
± 0,05 %
± 0,02 %
Data for selecting the actuator
± 20 mA
4 to 20 mA
Max. 500 Ω
1 mH
18 V
Max. 15 V continuous; 75 V for max. 1 ms
ANA
(sampling ratio 1:20)
Max. 50 mA DC
Yes
No
2AO I ST analog electronic module (6ES7135-4GB01-0AB0)
Manual, 04/2007, A5E01076949-01