Siemens SIMATIC ET 200SP Manual - Page 16

Browse online or download pdf Manual for Industrial Equipment Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 30 pages. Distributed i/o system
Also for Siemens SIMATIC ET 200SP: Manual (40 pages), User Manual (21 pages), Manual (34 pages), Manual (48 pages), Manual (34 pages), Product Information (38 pages), Manual (37 pages), Manual (36 pages), Manual (44 pages), Manual (31 pages), Manual (35 pages), Manual (23 pages), Configuration Manual (20 pages), Manual (34 pages), Manual (29 pages), Manual (33 pages), Manual (31 pages), User Manual (32 pages), Manual (31 pages), Manual (28 pages), Manual (41 pages), Manual (32 pages), Manual (49 pages), Manual (24 pages), Manual (34 pages), Manual (41 pages), Manual (30 pages), Manual (31 pages), Manual (27 pages), Manual (24 pages), Manual (24 pages), Manual (25 pages), Manual (49 pages), Manual (40 pages), Manual (38 pages), Manual (39 pages), Product Information (24 pages), Manual (32 pages), Product Information (10 pages), Equipment Manual (43 pages), Manual (33 pages), Equipment Manual (44 pages), Original Operating Instructions (6 pages), Manual (35 pages), Manual (28 pages), Equipment Manual (32 pages), Manual (50 pages), Manual (30 pages), Manual (26 pages), Manual (28 pages), Manual (34 pages), Manual (44 pages), Manual (33 pages), Equipment Manual (42 pages), Original Instructions Manual (16 pages)

Print Page

Parameters/address space

4.3 Address space

4.3

Address space

The module can be configured differently in STEP 7; see following table. Depending on the

configuration, additional/different addresses are assigned in the process image output/input.

Configuration options of DQ 16x24VDC/0.5A ST

You can configure the module with STEP 7 (TIA Portal) or with a GSD file. If you configure

the module by means of a GSD file, the configurations are available under various short

designations/module names; see the table below. The following configurations are possible:

Table 4- 2

Configuration options with GSD file

Configuration

1 x 16-channel without value

status

1 x 16-channel without value

status

1 x 16-channel with value status DQ 16x24VDC/0.5A ST V1.1, QI

Evaluating the value status

An additional two bytes are allocated in the input address space if you enable the value

status for the digital module. Bits 0 to 15 in these bytes are assigned to a channel. They

provide information about the validity of the digital value.

Bit = 1: No fault is present on the channel.

Bit = 0: Channel is deactivated or there is a fault on the module.

If a fault occurs on a channel with this module, the value status for all channels is 0.

Short designation/module name

in the GSD file

DQ 16x24VDC/0.5A ST V1.0

DQ 16x24VDC/0.5A ST V1.1

Configuration software, e.g. with STEP 7 (TIA Portal)

Integrated in the

hardware catalog

STEP 7, as of

V13, SP1

---

Digital output module DQ 16x24VDC/0.5A ST (6ES7132-6BH00-0BA0)

GSD file

PROFINET IO

PROFIBUS DP

---

Manual, 12/2015, A5E03574420-AC