Siemens SIMATIC ET 200SP Manual - Page 16

Browse online or download pdf Manual for Industrial Equipment Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 34 pages. Distributed i/o system
Also for Siemens SIMATIC ET 200SP: Manual (40 pages), User Manual (21 pages), Manual (34 pages), Manual (48 pages), Manual (30 pages), Product Information (38 pages), Manual (37 pages), Manual (36 pages), Manual (44 pages), Manual (31 pages), Manual (35 pages), Manual (23 pages), Configuration Manual (20 pages), Manual (34 pages), Manual (29 pages), Manual (33 pages), Manual (31 pages), User Manual (32 pages), Manual (31 pages), Manual (28 pages), Manual (41 pages), Manual (32 pages), Manual (49 pages), Manual (24 pages), Manual (34 pages), Manual (41 pages), Manual (30 pages), Manual (31 pages), Manual (27 pages), Manual (24 pages), Manual (24 pages), Manual (25 pages), Manual (49 pages), Manual (40 pages), Manual (38 pages), Manual (39 pages), Product Information (24 pages), Manual (32 pages), Product Information (10 pages), Equipment Manual (43 pages), Manual (33 pages), Equipment Manual (44 pages), Original Operating Instructions (6 pages), Manual (35 pages), Manual (28 pages), Equipment Manual (32 pages), Manual (50 pages), Manual (30 pages), Manual (26 pages), Manual (28 pages), Manual (34 pages), Manual (44 pages), Manual (33 pages), Equipment Manual (42 pages), Original Instructions Manual (16 pages)

Print Page
Siemens SIMATIC ET 200SP Manual
4.4

Address space

Address space of the analog output module AQ 2×U/I HF
The following figure shows the assignment of the address space for the AQ 2xU/I HF with
value status (Quality Information (QI)). The addresses for the value status are only available
if the value status is enabled.
Figure 4-1
Configuration options of the AQ 2xU/I HF
The following configurations are possible:
● Configuration 1: Without value status
● Configuration 2: With value status
Evaluating the value status
An additional byte is occupied in the input address space if you enable the value status for
the analog module. Bits 0 to 1 in this byte are assigned to a channel. They provide
information about the validity of the analog value.
Bit = 1: No fault is present on the channel.
Bit = 0: The wiring, the value created on the channel, or similar is incorrect.
Analog output module AQ 2xU/I HF (6ES7135-6HB00-0CA1)
Manual, 02/2014, A5E33062529-AA
Address space of the analog output module AQ 2×U/I HF
Parameters/address space
4.4 Address space
15