Siemens SIMATIC ET 200SP Configuration Manual - Page 9

Browse online or download pdf Configuration Manual for Industrial Equipment Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 20 pages. Distributed i/o system
Also for Siemens SIMATIC ET 200SP: Manual (40 pages), User Manual (21 pages), Manual (34 pages), Manual (48 pages), Manual (30 pages), Manual (34 pages), Product Information (38 pages), Manual (37 pages), Manual (36 pages), Manual (44 pages), Manual (31 pages), Manual (35 pages), Manual (23 pages), Manual (34 pages), Manual (29 pages), Manual (33 pages), Manual (31 pages), User Manual (32 pages), Manual (31 pages), Manual (28 pages), Manual (41 pages), Manual (32 pages), Manual (49 pages), Manual (24 pages), Manual (34 pages), Manual (41 pages), Manual (30 pages), Manual (31 pages), Manual (27 pages), Manual (24 pages), Manual (24 pages), Manual (25 pages), Manual (49 pages), Manual (40 pages), Manual (38 pages), Manual (39 pages), Product Information (24 pages), Manual (32 pages), Product Information (10 pages), Equipment Manual (43 pages), Manual (33 pages), Equipment Manual (44 pages), Original Operating Instructions (6 pages), Manual (35 pages), Manual (28 pages), Equipment Manual (32 pages), Manual (50 pages), Manual (30 pages), Manual (26 pages), Manual (28 pages), Manual (34 pages), Manual (44 pages), Manual (33 pages), Equipment Manual (42 pages), Original Instructions Manual (16 pages)

Print Page

3 Configuration

Configuring a "Shared Device"

3.2

The following describes how a decentralized peripheral device is configured as

"Shared Device" with STEP 7 from version V13 SP1 or higher.

The description is limited to two IO controllers from the S7-1500 family sharing a

"Shared Device"

Two projects are created (Shared-Device-1 and Shared-Device-2), each with one

IO controller ("PLC_1" and "PLC_2"). You need to create the "Shared Device" in

both projects, although physically speaking, it is one and the same IO device.

Note

Make sure that the IO device is configured the same in all projects. If you make

changes: Make the changes in every project in the "Shared Device".

3.2.1

Preparation

Open the TIA Portal configuration software and create a new project.

Implementing the devices

Via the project navigation, insert a S7-1500 CPU (here CPU 1516-3 PN/DP). It gets

the name "PLC_1".

In the "Devices & networks" overview, add a PROFINET interface module here IM

155-6 PN ST) and equip the interface module with the desired modules (here 2 DI

modules and 2 DO modules) and a server module.

Networking the devices

To set up an automation system, the individual hardware components must be

configured, parameterized and connected to each other. Use the device and

network view to do this.

Proceed as follows:

1. Select CPU 1516-3 PN/DP in the project tree and open its folder.

2. Open the device view of the CPU by double clicking "Device configuration".

3. In the graphical view, select the CPU interface to be networked. The properties

of the selected interface are displayed in the inspector window.

SharedDeviceKonfig

Entry ID: 109741600,

V1.0,

11/2016