Siemens SIMATIC ET 200SP Manual - Page 17

Browse online or download pdf Manual for Industrial Equipment Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 32 pages. Distributed i/o system
Also for Siemens SIMATIC ET 200SP: Manual (40 pages), User Manual (21 pages), Manual (34 pages), Manual (48 pages), Manual (30 pages), Manual (34 pages), Product Information (38 pages), Manual (37 pages), Manual (36 pages), Manual (44 pages), Manual (31 pages), Manual (35 pages), Manual (23 pages), Configuration Manual (20 pages), Manual (34 pages), Manual (29 pages), Manual (33 pages), Manual (31 pages), User Manual (32 pages), Manual (31 pages), Manual (28 pages), Manual (41 pages), Manual (49 pages), Manual (24 pages), Manual (34 pages), Manual (41 pages), Manual (30 pages), Manual (31 pages), Manual (27 pages), Manual (24 pages), Manual (24 pages), Manual (25 pages), Manual (49 pages), Manual (40 pages), Manual (38 pages), Manual (39 pages), Product Information (24 pages), Manual (32 pages), Product Information (10 pages), Equipment Manual (43 pages), Manual (33 pages), Equipment Manual (44 pages), Original Operating Instructions (6 pages), Manual (35 pages), Manual (28 pages), Equipment Manual (32 pages), Manual (50 pages), Manual (30 pages), Manual (26 pages), Manual (28 pages), Manual (34 pages), Manual (44 pages), Manual (33 pages), Equipment Manual (42 pages), Original Instructions Manual (16 pages)

Print Page

Parameters/address space

4.1

Parameters

Parameters for RQ 4x120VDC-230VAC/5A NO ST

Specify the module properties with the various parameters in the course of your STEP 7

configuration. The following table lists the configurable parameters. The effective range of

the parameters depends on the type of configuration.

The following configurations are possible:

● Central operation with an ET 200SP CPU

● Distributed operation on PROFINET IO in an ET 200SP system

● Distributed operation with PROFIBUS DP in an ET 200SP system

When assigning parameters in the user program, use the "WRREC" instruction to transfer

the parameters to the module using the data records; refer to the section Parameter

assignment and structure of the parameter data record (Page 29).

The following parameter settings are possible:

Table 4- 1

Settable parameters and their defaults (GSD file)

Parameter

Diagnostics

No supply voltage L+

Channel enabled

Reaction to CPU STOP •

Due to the limited number of parameters at a maximum of 244 bytes per ET 200SP station with a PROFIBUS GSD

configuration, the configuration options are restricted. If required, you can assign these parameters using data rec-

ord 128 as described in the "GSD file PROFINET IO" column (see table above). The parameter length of the I/O module

is 8 bytes.

Digital output module RQ 4x120VDC-230VAC/5A NO ST (6ES7132-6HD01-0BB1)

Manual, 09/2017, A5E03576775-AE

Value range

Disable

•

Enable

•

Disable

•

Enable

•

Turn off

Keep last value

•

Output substitute value 1

•

Default

Configura-

tion in RUN

Disable

yes

Enable

yes

Turn off

yes

Scope with configuration software,

e.g. STEP 7 (TIA Portal)

GSD file

PROFINET IO

PROFIBUS DP

Module

Channel

Module