Siemens SIMATIC ET 200SP Manual - Page 25

Browse online or download pdf Manual for Industrial Equipment Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 50 pages. Distributed i/o system
Also for Siemens SIMATIC ET 200SP: Manual (40 pages), User Manual (21 pages), Manual (34 pages), Manual (48 pages), Manual (30 pages), Manual (34 pages), Product Information (38 pages), Manual (37 pages), Manual (36 pages), Manual (44 pages), Manual (31 pages), Manual (35 pages), Manual (23 pages), Configuration Manual (20 pages), Manual (34 pages), Manual (29 pages), Manual (33 pages), Manual (31 pages), User Manual (32 pages), Manual (31 pages), Manual (28 pages), Manual (41 pages), Manual (32 pages), Manual (49 pages), Manual (24 pages), Manual (34 pages), Manual (41 pages), Manual (30 pages), Manual (31 pages), Manual (27 pages), Manual (24 pages), Manual (24 pages), Manual (25 pages), Manual (49 pages), Manual (40 pages), Manual (38 pages), Manual (39 pages), Product Information (24 pages), Manual (32 pages), Product Information (10 pages), Equipment Manual (43 pages), Manual (33 pages), Equipment Manual (44 pages), Original Operating Instructions (6 pages), Manual (35 pages), Manual (28 pages), Equipment Manual (32 pages), Manual (30 pages), Manual (26 pages), Manual (28 pages), Manual (34 pages), Manual (44 pages), Manual (33 pages), Equipment Manual (42 pages), Original Instructions Manual (16 pages)

Print Page

Product overview

2.2 Functions

2.2.15

Setting the time

The interface module supports time setting, for example, with AI Energy Meter 480VAC/CT HF

(6ES7134-6PA00-0CU0).

In an application example (https://support.industry.siemens.com/cs/ww/en/view/109754890)

we show you how to set the time of day.

Note that you call the block "Sync_Time_ET200SP" in the user program for each hardware

identifier of the two IM 155-6 interface modules of a redundant ET 200SP R1 station. If there

is a loss of redundancy on the ET 200SP R1 involved, one of the two calls of the block

"Sync_Time_ET200SP" can be acknowledged with an error. If the call of one of the two blocks

is successful, the time has been set in the ET 200SP R1 device.

2.2.16

For example, if there is an AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0), the time

is automatically distributed within the ET 200SP station. You can find more information in the

section Setting the time (Page 24).

2.2.17

A diagnostic interrupt is a display of an error state.

If a module with diagnostic capability in which the diagnostic interrupt is released detects a

change in its diagnostic state, it sends a diagnostics interrupt request to the CPU.

The CPU then interrupts the processing of the user program and processes the diagnostic

interrupt OB (OB 82).

For additional information, refer to the sections Interrupts (Page 36) and Alarms (Page 39).

2.2.18

According to the configuration, the I/O modules or the interface module trigger a hardware

interrupt for certain events/states. When a hardware interrupt occurs, the CPU interrupts the

execution of the user program and runs the assigned hardware interrupt OB. The event that

triggered the interrupt is entered in the start information of the assigned hardware interrupt

OB by the CPU.

Interface Module IM 155-6 PN R1 (6ES7155-6AU00-0HM0)

Equipment Manual, 11/2022, A5E51160307-AA