Siemens SIMATIC ET 200SP Manual - Page 12

Browse online or download pdf Manual for Industrial Equipment Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 44 pages. Distributed i/o system
Also for Siemens SIMATIC ET 200SP: Manual (40 pages), User Manual (21 pages), Manual (34 pages), Manual (48 pages), Manual (30 pages), Manual (34 pages), Product Information (38 pages), Manual (37 pages), Manual (36 pages), Manual (44 pages), Manual (31 pages), Manual (35 pages), Manual (23 pages), Configuration Manual (20 pages), Manual (34 pages), Manual (29 pages), Manual (33 pages), Manual (31 pages), User Manual (32 pages), Manual (31 pages), Manual (28 pages), Manual (41 pages), Manual (32 pages), Manual (49 pages), Manual (24 pages), Manual (34 pages), Manual (41 pages), Manual (30 pages), Manual (31 pages), Manual (27 pages), Manual (24 pages), Manual (24 pages), Manual (25 pages), Manual (49 pages), Manual (40 pages), Manual (38 pages), Manual (39 pages), Product Information (24 pages), Manual (32 pages), Product Information (10 pages), Equipment Manual (43 pages), Manual (33 pages), Equipment Manual (44 pages), Original Operating Instructions (6 pages), Manual (35 pages), Manual (28 pages), Equipment Manual (32 pages), Manual (50 pages), Manual (30 pages), Manual (26 pages), Manual (28 pages), Manual (34 pages), Manual (33 pages), Equipment Manual (42 pages), Original Instructions Manual (16 pages)

Print Page

Product overview

2.2 Functions

Requirements

The table below shows the software requirements for a configuration with the

IM 155-6 PN ST interface module:

Table 2- 1

Version dependencies of other module functions

Function

Real-time communication

Isochronous real-time

communication

Prioritized startup

Device replacement without

programming device

Media redundancy (MRP)

Shared device

PROFIenergy

Module-internal Shared Input/

Shared Output (MSI/MSO)

Station extension via

ET-Connection

User data 512 bytes

Systems of third-party manufacturers: Depending on the range of functions of the third-party system

Cabling with fixed connection setting

If you set a fixed connection setting of the port in STEP 7, you should also disable

"Autonegotiation/Autocrossover".

You can find more information on this topic in the STEP 7 online help and

● As of STEP 7 V12, in the PROFINET with STEP 7 V13

(http://support.automation.siemens.com/WW/view/en/49948856) function manual

● As of STEP 7 V5.5, in the system manual PROFINET System Description

(http://support.automation.siemens.com/WW/view/en/19292127)

Product version

Firmware

of the module

version of the

as of

module as of

V1.0.0

V3.1.0

Configuration software

Configuration with

STEP 7 as of

GSD file

V5.5 SP3 with

(http://support.auto

HSP241

mation.siemens.co

m/WW/view/en/196

98639/130000)/soft

ware from a third-

party manufacturer

---

IM 155-6 PN ST interface module (6ES7155-6AU00-0BN0)

Manual, 12/2014, A5E03576904-AC

STEP 7

(TIA Portal), as

of V11 SP2

---

(as of V13 SP1)