Siemens SIMATIC ET 200SP HA Equipment Manual - Page 11

Browse online or download pdf Equipment Manual for Industrial Equipment Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 38 pages. Distributed i/o devices busadapter for distributed i/o
Also for Siemens SIMATIC ET 200SP HA: Manual (32 pages), Manual (50 pages), Manual (34 pages), Manual (38 pages), Equipment Manual (44 pages), Equipment Manual (50 pages), Equipment Manual (46 pages), Equipment Manual (42 pages), Equipment Manual (44 pages), Equipment Manual (36 pages), Equipment Manual (38 pages)

Print Page

• Reference identification label

• Shield connector

3.3

Terminal blocks

Definition

The terminal blocks provide the process terminals (push-in terminals) for the connection of

components, such as devices.

Description

The following terminal blocks are available for the I/O module:

Article No.

6DL1193-6TP00-0DH1

6DL1193-6TP00-0BH1

6DL1193-6TP00-0DP0

6DL1193-6TP00-0BP0

Note

The terminal blocks are not included in the scope of delivery of the I/O module and must be

ordered separately.

You can find additional information on the configuration in the system manual.

3.4

Definition

The terminal block with potential distributor (L+ potential) offers the following properties:

• Separate protection so that "only" the affected channel fails in the event of a short circuit or

overload.

• A failure does not affect the entire system.

• A wire break is signaled if the parameters "Diagnostics, Wire break" and "Check for wire break"

are enabled.

The L+ terminals on the potential distributor are connected individually using automatic circuit

breakers to a maximum of 20 mA.

DI 32x24VDC HA

Equipment Manual, 10/2021, A5E48262828-AB

Color

Description

Lit

Dark

Lit

Terminal block with potential distributor on the right side for encoder supply

Dark

Terminal block with potential distributor on the right side for encoder supply

3.4 Terminal blocks with potential distributors (L+ potential)

Product overview