Siemens SIMATIC NET Operating Instructions Manual - Page 9

Browse online or download pdf Operating Instructions Manual for Industrial Equipment Siemens SIMATIC NET. Siemens SIMATIC NET 50 pages. Network components bus terminal
Also for Siemens SIMATIC NET: Operating Instructions Manual (29 pages), Operating Instructions Manual (28 pages), Assembly Instructions Manual (6 pages), Product Information (6 pages), Installation Manual (40 pages), Installation Manual (50 pages), Installation Manual (40 pages), Reference Manual (14 pages), Installation Manual (34 pages), Installation Manual (48 pages), Operating Instructions Manual (32 pages)

Print Page

Safety notices

Read the safety notices

Note the following safety notices. These relate to the entire working life of the device.

You should also read the safety notices relating to handling in the individual sections,

particularly in the sections "Installation" and "Connecting up".

Safety notices on use in hazardous areas

General safety notices relating to protection against explosion

EXPLOSION HAZARD

DO NOT OPEN WHEN ENERGIZED.

Safety notices when using the device according to Hazardous Locations (HazLoc)

If you use the device under HazLoc conditions you must also keep to the following safety

notices in addition to the general safety notices for protection against explosion:

This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-

hazardous locations only.

This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations

only.

Extender for SCALANCE XM-400

Operating Instructions, 05/2014, C79000-G8976-C332-03

WARNING