Siemens SIMATIC NET Installation Manual - Page 19

Browse online or download pdf Installation Manual for Industrial Equipment Siemens SIMATIC NET. Siemens SIMATIC NET 40 pages. Network components bus terminal
Also for Siemens SIMATIC NET: Operating Instructions Manual (29 pages), Operating Instructions Manual (50 pages), Operating Instructions Manual (28 pages), Assembly Instructions Manual (6 pages), Product Information (6 pages), Installation Manual (50 pages), Installation Manual (40 pages), Reference Manual (14 pages), Installation Manual (34 pages), Installation Manual (48 pages), Operating Instructions Manual (32 pages)

Print Page

Installing the Device

2.1.2 Mounting the Device to a Rack

Insert the device into rack mount adapter and use the screws to secure it.

Note

The device can be installed with the communication ports facing the front or

rear of the rack, depending on the desired orientation.

1 1

Rack Mount Adapter

Screw

Figure 2.3

Rack Mounting

Insert the rack mount adapter and device assembly into the rack.

Note

Since heat within the device is channelled to the enclosure, it is recommended

that 1 rack-unit of space, or 44 mm (1.75 in), be kept empty above the device.

This allows a small amount of convectional airflow.

Forced airflow is not required. However, any increase in airflow will result in a

reduction of ambient temperature and improve the long-term reliability of all

equipment mounted in the rack space.

Secure the adapter to the rack using the supplied hardware.

RUGGEDCOM RS8000T

Installation Manual, 01/2021, C79000-G8976-1023-05