Siemens SIMATIC NET Installation Manual - Page 44

Browse online or download pdf Installation Manual for Industrial Equipment Siemens SIMATIC NET. Siemens SIMATIC NET 50 pages. Network components bus terminal
Also for Siemens SIMATIC NET: Operating Instructions Manual (29 pages), Operating Instructions Manual (50 pages), Operating Instructions Manual (28 pages), Assembly Instructions Manual (6 pages), Product Information (6 pages), Installation Manual (40 pages), Installation Manual (40 pages), Reference Manual (14 pages), Installation Manual (34 pages), Installation Manual (48 pages), Operating Instructions Manual (32 pages)

Print Page
Siemens SIMATIC NET Installation Manual
•
•
•
•
The device is marked with a CE marking and can be used throughout the European
community.
A copy of the CE Declaration of Conformity is available from Siemens AG. For contact
information, refer to
6.1.4

FCC

This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case users will be required to
correct the interference at their own expense.
Note
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this device.
6.1.5

FDA/CDRH

This device meets the requirements of the following U.S. Food and Drug
Administration (FDA) standard:
RUGGEDCOM RS900F
Installation Manual, 04/2021, C79000-G8976-1350-07
EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
EN 50581
Technical Documentation for the Assessment of Electrical and Electronic
Products with Respect to the Restriction of Hazardous Substances
EN 55022
Information Technology Equipment – Radio Disturbance Characteristics – Limits
and Methods of Measurement
"Contacting Siemens (Page
vii)".
Certification
6.1.4 FCC
35