Siemens SIMATIC NET Installation Manual - Page 18

Browse online or download pdf Installation Manual for Industrial Equipment Siemens SIMATIC NET. Siemens SIMATIC NET 40 pages. Network components bus terminal
Also for Siemens SIMATIC NET: Operating Instructions Manual (29 pages), Operating Instructions Manual (50 pages), Operating Instructions Manual (28 pages), Assembly Instructions Manual (6 pages), Product Information (6 pages), Installation Manual (40 pages), Installation Manual (50 pages), Reference Manual (14 pages), Installation Manual (34 pages), Installation Manual (48 pages), Operating Instructions Manual (32 pages)

Print Page

2.3.2

Mounting the Device to a Panel

To mount the device to a panel, do the following:

2.4

The RUGGEDCOM RMC30 supports a single integrated high AC/DC or low DC power

supply

RUGGEDCOM RMC30

Installation Manual, 04/2021, C79000-G8976-1008-10

Disassemble the device and panel adapter.

Remove the screw at the bottom of the adapter.

Pull the device out of the adapter.

RUGGEDCOM RMC30

Panel Adapter

Mounting Holes

Screw

Metal Clips

Figure 2.3

Panel Mounting

Place the panel adapter against the panel and align the adapater with the

mounting holes.

Secure the panel adapter using three #6-32 screws.

Insert the device into the adapter. Make sure the device is secured between the

two metal clips.

Install the screw previously removed from the bottom of the panel adapter.

2.3.2 Mounting the Device to a Panel

Installing the Device