Siemens SIMATIC NET Installation Manual - Page 12

Browse online or download pdf Installation Manual for Industrial Equipment Siemens SIMATIC NET. Siemens SIMATIC NET 34 pages. Network components bus terminal
Also for Siemens SIMATIC NET: Operating Instructions Manual (29 pages), Operating Instructions Manual (50 pages), Operating Instructions Manual (28 pages), Assembly Instructions Manual (6 pages), Product Information (6 pages), Installation Manual (40 pages), Installation Manual (50 pages), Installation Manual (40 pages), Reference Manual (14 pages), Installation Manual (48 pages), Operating Instructions Manual (32 pages)

Print Page

Power Supply Terminal Block

POWER LED

Copper Ethernet Ports

Chassis Ground Terminal

1.2

Required Tools and Materials

The following tools and materials are required to install the RUGGEDCOM RP100:

AC or DC power cord (16 AWG)

CAT-5 Ethernet cables

Flathead screwdriver

1.3

Decommissioning and Disposal

Proper decommissioning and disposal of this device is important to prevent malicious

users from obtaining proprietary information and to protect the environment.

Decommissioning

This device may include sensitive, proprietary data. Before taking the device out of

service, either permanently or for maintenance by a third-party, make sure it has

been fully decommissioned.

For more information, refer to the associated Configuration Manual.

Recycling and Disposal

For environmentally friendly recycling and disposal of this device and related

accessories, contact a facility certified to dispose of waste electrical and electronic

equipment. Recycling and disposal must be done in accordance with local

regulations.

RUGGEDCOM RP100

Installation Manual, 01/2021, C79000-G8976-1011-05

A pluggable terminal block. For more information, refer to

"Connecting Power (Page 10)"

(Page 17)"

Illuminates when power is being supplied to the device.

Receive and transmit data, as well as provide power to a

RUGGEDCOM WIN subscriber station. For more information, refer to

"Communication Ports (Page

Protects the device from power surges and accumulated static

electricity. For information about grounding the device, refer to

"Grounding the Device (Page

Tools/Materials

1.2 Required Tools and Materials

and

"Power Supply Specifications

15)".

9)".

Purpose

For connecting power to the device.

For connecting the device to the network.

For mounting the device to a DIN rail.

Introduction