Siemens SIMATIC NET RUGGEDCOM i801 Installation Manual - Page 20
Browse online or download pdf Installation Manual for Industrial Equipment Siemens SIMATIC NET RUGGEDCOM i801. Siemens SIMATIC NET RUGGEDCOM i801 38 pages. Rugged ethernet switches
Also for Siemens SIMATIC NET RUGGEDCOM i801: Installation Manual (36 pages)
Print Page
Device Management
This section describes how to connect to and manage the device.
3.1
Connecting to the Device
The following describes the various methods for accessing the RUGGEDCOM i801
console and Web interfaces on the device. For more detailed instructions, refer to the
RUGGEDCOM ROS Configuration Manual for the RUGGEDCOM i801.
RS232 Console Port
Connect a PC or terminal directly to the RS232 console port to access the boot-
time control and RUGGEDCOM i801 interfaces. The console port provides access to
RUGGEDCOM i801's console and Web interfaces.
The console port is intended to be used only as a temporary connection during initial
configuration or troubleshooting.
Connection to the console port is made using an RJ45-to-DB9 console cable. The
following is the pin-out for the console port:
8
Figure 3.1
RJ45 Male
RUGGEDCOM i801
Installation Manual, 01/2021, C79000-G8976-1003-06
NOTICE
1
RJ45 Console Port Pin Configuration
Pin
DB9 Female
a
1
6
2
1
a
3
4
4
5
5
2
6
3
7
8
Name
Description
DSR
Data Set Ready
DCD
Carrier Detect
DTR
Data Terminal Ready
GND
Signal Ground
RxD
Receive Data (to DTE)
TxD
Transmit Data (from DTE)
b
CTS
Clear to Send
3
Comment
Reserved (Do Not Connect)
11