Siemens SIMATIC RTLS4040T Operating Instructions Manual - Page 13
Browse online or download pdf Operating Instructions Manual for Industrial Equipment Siemens SIMATIC RTLS4040T. Siemens SIMATIC RTLS4040T 21 pages. Localization systems
Also for Siemens SIMATIC RTLS4040T: Operating Instructions Manual (23 pages)
Print Page
Installation & operation
3.1
Notes on installation
Note
Before you install the devices, read this section carefully to ensure trouble-free installation
and commissioning.
The devices can only be used in conjunction with the RTLS localization system.
Mount the device so that it has a direct line-of-sight connection to the gateways (360°
panorama view). Any type of material can impact wireless localization. Wireless localization
through metal is not possible. In this case, localization may be based on radio reflections and
result in inaccurate localization.
Check the device for damages before you use it so that it is not damaged during operation.
The specified operating temperature ranges must be observed.
The device contains a lithium-ion battery.
Contact with the battery fluid
Incorrect handling of the device may damage the battery and cause fluid to leak out of the
battery.
Avoid contact with the battery fluid. Rinse skin that comes into contact with battery fluid
with water. If fluid from the battery gets into the eye, seek medical attention.
Handling batteries
There is a risk of fire and in extreme cases of explosion in the following cases:
• If the battery is improperly charged and discharged
• If the polarity is reversed
• If a short-circuit occurs
This applies to lithium-ion batteries:
• Do not squeeze
• Do not heat and do not burn
• Do not short-circuit
• Do not disassemble
• Do not immerse in liquid - the battery may crack or burst.
SIMATIC RTLS4040T
Operating Instructions, 12/2020, C79000-G8976-C596-01
CAUTION
CAUTION
3
13