Siemens SIMATIC RTLS4083T Operating Manual - Page 15

Browse online or download pdf Operating Manual for Industrial Equipment Siemens SIMATIC RTLS4083T. Siemens SIMATIC RTLS4083T 30 pages. Localization systems
Also for Siemens SIMATIC RTLS4083T: Operating Instructions Manual (33 pages), Device Manual (11 pages), Operating Instructions Manual (37 pages), Operating Instructions Manual (24 pages)

Print Page

Installation & operation

3.1

Note

Before you install the transponders, read this section carefully to ensure problem-free

installation and commissioning.

The transponders can only be used in conjunction with the RTLS localization system.

Install the transponder in such a way that it has a direct line-of-sight connection to the

gateways (360° panorama view). Any type of material can impact wireless localization.

Wireless localization through metal is not possible. In this case, localization via wireless

reflections can occur which results in an inaccurate localization.

Check the transponder for damage before installation. Protect the display from objects that

could scratch or otherwise damage it. The specified operating temperature ranges must be

observed.

The transponder contains one lithium ion battery.

Contact with the battery fluid

Incorrect handling of the transponder may damage the battery and cause fluid to leak out of

the battery.

Avoid contact with the battery fluid. Rinse skin that comes into contact with battery fluid with

water. If fluid from the battery gets into the eye, seek medical attention.

Handling batteries

There is a risk of fire and, in extreme cases, of explosion in the following cases:

• If the battery is improperly charged and discharged

• If the polarity is reversed

• If a short-circuit occurs

This applies to lithium-ion batteries:

• Do not squeeze

• Do not heat and do not burn

• Do not short-circuit

• Do not disassemble

• Do not immerse in liquid - the battery may crack or burst

SIMATIC RTLS4083T

Operating Manual, 05/2023, C79000-G8976-C646-05

CAUTION