Siemens Simatic S7-1500 Communication Instruction Manual - Page 14

Browse online or download pdf Communication Instruction Manual for Industrial Equipment Siemens Simatic S7-1500. Siemens Simatic S7-1500 36 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Also for Siemens Simatic S7-1500: Manual (40 pages), Manual (37 pages), Manual (47 pages), Manual (24 pages), Manual (34 pages), User Manual (45 pages), Manual (27 pages), Configuration Manual (20 pages), Manual (47 pages), Manual (43 pages), Manual (48 pages), Manual (26 pages), Manual (28 pages), Manual (50 pages), Manual (34 pages), User Manual (44 pages), Manual (50 pages), Manual (30 pages), Manual (41 pages), Manual (50 pages), Manual (40 pages), Safety Programming Manualline (48 pages), Manual (40 pages), Manual (25 pages), Manual (42 pages), Application Description (50 pages), Manual (28 pages), Manual (33 pages), Manual (49 pages), Manual (36 pages), Manual (41 pages), Manual (46 pages), Manual (38 pages), Manual (35 pages), Manual (39 pages), Manual (28 pages), Manual (35 pages), Equipment Manual (35 pages), Manual (50 pages), Equipment Manual (32 pages), Equipment Manual (38 pages), Manual (29 pages), Equipment Manual (38 pages), Manual (34 pages), Manual (36 pages), Equipment Manual (50 pages), Manual (45 pages)

Print Page

4 Configuration and Project Engineering

Configuration and Project Engineering

This chapter describes the configuration in STEP 7 (TIA Portal) and the

programming of the gateway configuration files.

If you want to use the sample configuration of this application example without any

changes, you can download the STEP 7 project directly to the S7-1200 CPU and

the gateway configuration to the gateway (see Chapter

gateway).

4.1

Note

Before you can configure the gateway in STEP 7 (TIA Portal), you must install

the gateway's GSD file. The GSD file can be found on the gateway's web user

interface, "Profinet > GSDML file".

GSD file in TIA Portal.

When you open the supplied "MBS_KNX" STEP 7 project, the GSD file is

installed automatically, see

Table 4-1: Device configuration in STEP 7 (TIA Portal)

No.

Create a STEP 7 (TIA Portal) project and

insert an S7-1200 CPU (S7-1214C DC/DC/DC

FW4.2).

In "Devices & networks", open the "Network

view".

In the hardware catalog, navigate to "Head

module", "UGW-micro".

Make sure that the firmware version (V2.31) is

correct.

Communication with S7 CPU via KNX Gateway

Entry ID: 109739689,

V1.0,

5.3.2 Commissioning the S7-1200

Action

06/2017

5.3.1 Commissioning the

\6\

provides a description of how to install a

Comment

Requirement: You have STEP 7 (TIA Portal)

V14 or higher installed on your computer.

CPU.