Siemens Simatic S7-1500 Communication Instruction Manual - Page 28

Browse online or download pdf Communication Instruction Manual for Industrial Equipment Siemens Simatic S7-1500. Siemens Simatic S7-1500 36 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Also for Siemens Simatic S7-1500: Manual (40 pages), Manual (37 pages), Manual (47 pages), Manual (24 pages), Manual (34 pages), User Manual (45 pages), Manual (27 pages), Configuration Manual (20 pages), Manual (47 pages), Manual (43 pages), Manual (48 pages), Manual (26 pages), Manual (28 pages), Manual (50 pages), Manual (34 pages), User Manual (44 pages), Manual (50 pages), Manual (30 pages), Manual (41 pages), Manual (50 pages), Manual (40 pages), Safety Programming Manualline (48 pages), Manual (40 pages), Manual (25 pages), Manual (42 pages), Application Description (50 pages), Manual (28 pages), Manual (33 pages), Manual (49 pages), Manual (36 pages), Manual (41 pages), Manual (46 pages), Manual (38 pages), Manual (35 pages), Manual (39 pages), Manual (28 pages), Manual (35 pages), Equipment Manual (35 pages), Manual (50 pages), Equipment Manual (32 pages), Equipment Manual (38 pages), Manual (29 pages), Equipment Manual (38 pages), Manual (34 pages), Manual (36 pages), Equipment Manual (50 pages), Manual (45 pages)

Siemens Simatic S7-1500 Communication Instruction Manual
5 Installation and Commissioning
5.2.2

Installation under plant conditions

Under "real" conditions, a SIMATIC controller is normally directly connected to a
KNX gateway. The gateway is integrated into a PROFINET network via the two
PROFINET interfaces and connected to the KNX network via the KNX interface.
Figure 5-2: Installation under plant conditions
24V DC
S7-1200 CPU
PN
IP: 192.168.0.1
PROFINET IE
Communication with S7 CPU via KNX Gateway
Entry ID: 109739689,
V1.0,
PROFINET 1 / 2
IP: 192.168.0.2
"Triple-X PROFINET + KNX"
universal gatewy
KNX
+ -
+
-
KNX
power supply
L
N
PE
230V AC
06/2017
24V DC
RS 232/485
LAN
IP: 192.168.0.3
KNX
+
-
+
-
KNX
KNX
wall switch
room
control unit
28