Siemens Simatic S7-1500 Application Description - Page 15

Browse online or download pdf Application Description for Industrial Equipment Siemens Simatic S7-1500. Siemens Simatic S7-1500 50 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Also for Siemens Simatic S7-1500: Manual (40 pages), Manual (37 pages), Manual (47 pages), Manual (24 pages), Manual (34 pages), User Manual (45 pages), Manual (27 pages), Configuration Manual (20 pages), Manual (47 pages), Manual (43 pages), Manual (48 pages), Manual (26 pages), Manual (28 pages), Manual (50 pages), Manual (34 pages), User Manual (44 pages), Manual (50 pages), Manual (30 pages), Manual (41 pages), Manual (50 pages), Manual (40 pages), Safety Programming Manualline (48 pages), Communication Instruction Manual (36 pages), Manual (40 pages), Manual (25 pages), Manual (42 pages), Manual (28 pages), Manual (33 pages), Manual (49 pages), Manual (36 pages), Manual (41 pages), Manual (46 pages), Manual (38 pages), Manual (35 pages), Manual (39 pages), Manual (28 pages), Manual (35 pages), Equipment Manual (35 pages), Manual (50 pages), Equipment Manual (32 pages), Equipment Manual (38 pages), Manual (29 pages), Equipment Manual (38 pages), Manual (34 pages), Manual (36 pages), Equipment Manual (50 pages), Manual (45 pages)

Print Page
Siemens Simatic S7-1500 Application Description

4 Configuration and Project Engineering

4.1 Creating the project configuration

4
Configuration and Project Engineering
4.1
Creating the project configuration
•
If you only want to download and start up the sample program, follow the
Note
instructions in chapter 5.
•
The procedure described in the following table is one option for
configuring a SIMATIC S7-1500 and parameterizing a SINAMICS
G120C PN for data exchange between a SIMATIC controller and a
SINAMICS drive. TIA Portal offers several possible solutions that differ
to a greater or lesser degree from the procedure shown here.
The tables below describe what you have to do if you do not use the sample code
and want to configure the SIMATIC S7-1500 CPU, the SINAMICS G120 and the
KTP600 HMI yourself.
Programming the SIMATIC S7-1500 and configuring the operator panel are not the
subject of this chapter.
It is assumed that the software, see
Table 4-1: Creating the project configuration
No.
Action
1.
Open TIA Portal.
2.
If TIA Portal opens in the
Portal view, go to the bottom
left to switch to the Project
view.
SINAMICS G120 as a Speed Axis on the S7-1500
V1.0a, Entry ID: 78788716
Table
2-4, is installed on your PG/PC.
Creating the project
Picture
15