Siemens Simatic S7-1500 Manual - Page 19

Browse online or download pdf Manual for Industrial Equipment Siemens Simatic S7-1500. Siemens Simatic S7-1500 29 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Also for Siemens Simatic S7-1500: Manual (40 pages), Manual (37 pages), Manual (47 pages), Manual (24 pages), Manual (34 pages), User Manual (45 pages), Manual (27 pages), Configuration Manual (20 pages), Manual (47 pages), Manual (43 pages), Manual (48 pages), Manual (26 pages), Manual (28 pages), Manual (50 pages), Manual (34 pages), User Manual (44 pages), Manual (50 pages), Manual (30 pages), Manual (41 pages), Manual (50 pages), Manual (40 pages), Safety Programming Manualline (48 pages), Communication Instruction Manual (36 pages), Manual (40 pages), Manual (25 pages), Manual (42 pages), Application Description (50 pages), Manual (28 pages), Manual (33 pages), Manual (49 pages), Manual (36 pages), Manual (41 pages), Manual (46 pages), Manual (38 pages), Manual (35 pages), Manual (39 pages), Manual (28 pages), Manual (35 pages), Equipment Manual (35 pages), Manual (50 pages), Equipment Manual (32 pages), Equipment Manual (38 pages), Equipment Manual (38 pages), Manual (34 pages), Manual (36 pages), Equipment Manual (50 pages), Manual (45 pages)

Print Page
Siemens Simatic S7-1500 Manual
Configure

5.2 Configuration of the active backplane bus in the TIA Portal

5.2
Configuration of the active backplane bus in the TIA Portal
The representation of a station in the graphics area of the device view consists of 2 main
areas:
①
②
Replacing a rack
To replace the U-connector rack for an active backplane bus, you can use the "Change device"
function.
Switch to the device view.
Then there are 2 options for starting the "Change device" function:
• Via the shortcut menu
– Right-click in the rack area (1) or on the name of the rack (in the figure above e.g.
– Select "Change device" from the shortcut menu. A dialog window opens.
– Select another rack and click "OK". The replacement of the rack starts.
• Via drag-and-drop
– The hardware catalog is open. Select the "Rack" folder and navigate through the
– Select the desired rack.
– Drag the rack into the rack area (1) and place it there.
18
Rack area
Module area (slots)
"Rail_0").
subfolders to the desired rack.
Active backplane bus ST 1+12 slot, active backplane bus ST 1+8 slot, active backplane bus ST 1+4 slot
Equipment Manual, 07/2020, A5E46240468-AB