Siemens Simatic S7-1500/ET 200MP Equipment Manual - Page 17
Browse online or download pdf Equipment Manual for Industrial Equipment Siemens Simatic S7-1500/ET 200MP. Siemens Simatic S7-1500/ET 200MP 34 pages. Digital input module di 16x24vdc ba
Also for Siemens Simatic S7-1500/ET 200MP: Manual (28 pages), Manual (41 pages), Manual (35 pages)
Print Page
Wiring
3.4 Wiring of the module
3.4
Wiring of the module
Requirement
• The I/O modules are installed on the mounting rail.
• The supply voltage of the station is switched off.
Procedure
1. Plug the two SIMATIC TOP connect connecting cables with the 40-pin IDC connector into
X10 and X11.
Note when plugging:
– ① The nob on the left edge of connector X11
– ② The nob on the right edge of connector X10
2. Guide the SIMATIC TOP connect connecting cables down to the module.
3. Guide a cable tie around the module at the fixing points and connect the SIMATIC TOP
connect cables.
16
Figure 3-3
Connect the SIMATIC TOP connect 40-pin connecting cable to the module
Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)
Equipment Manual, 07/2020, A5E48025116-AA