Siemens SIMATIC S7-200 Driver Manual - Page 6
Browse online or download pdf Driver Manual for Industrial Equipment Siemens SIMATIC S7-200. Siemens SIMATIC S7-200 28 pages. Ethernet gateway for simatic mpi/ profibus driver
Also for Siemens SIMATIC S7-200: Manual (30 pages), Manual (35 pages), Manual (49 pages), Manual (18 pages), System Manual (20 pages)
Siemens S7-200 Driver
Channel Properties — Serial Communications
Serial communication properties are available to serial drivers and vary depending on the driver, connection
type, and options selected. Below is a superset of the possible properties.
Click to jump to one of the sections:
Operational
Behavior.
Note: With the server's online full-time operation, these properties can be changed at any time. Utilize
the User Manager to restrict access rights to server features, as changes made to these properties can
temporarily disrupt communications.
Connection Type
Physical Medium: Choose the type of hardware device for data communications. Options include COM
Port, None, Modem, and Ethernet Encapsulation. The default is COM Port.
None: Select None to indicate there is no physical connection, which displays the
l
Communications
COM Port: Select Com Port to display and configure the
l
Modem: Select Modem if phone lines are used for communications, which are configured in the
l
Modem Settings
Ethernet Encap.: Select if Ethernet Encapsulation is used for communications, which displays the
l
Ethernet Settings
Shared: Verify the connection is correctly identified as sharing the current configuration with another
l
channel. This is a read-only property.
Serial Port Settings
COM ID: Specify the Communications ID to be used when communicating with devices assigned to the
channel. The valid range is 1 to 9991 to 16. The default is 1.
Baud Rate: Specify the baud rate to be used to configure the selected communications port.
Data Bits: Specify the number of data bits per data word. Options include 5, 6, 7, or 8.
Connection
Type,
section.
section.
section.
www. ptc.com
Serial Port Settings
or
Ethernet
Serial Port Settings
Settings, and
Operation with no
section.
6